Sydney: Factory 36, 17 Lorraine St, Peakhurst, NSW 2210
Ph: 02 9534 5522 | Fax: 02 9534 5426
sales@nationalaircompressors.com.au

Brisbane: 20 Hinkler Court, Brendale, QLD 4500
Ph: 07 3205 1300 | Fax: 07 3205 1288
www.enerquip.com.au
SHIPPING AUSTRALIA WIDE!

Home > Compressed Air System Packages > Compressed Air Pipeworks


Maxair Compressed Airline Pipework

We EXCLUSIVELY use MAXAIR PE100 compressed air pipe. It's stronger, more flexible and can resist higher temperatures with higher pressures than any other poly compressed air pipe in Australia. Simply - Its the best. Compressed air is dangerous and we take no chances with the materials that we use and supply. If you want the cheap stuff and to cut corners - sorry we can't help you.

How do we join poly compressed air pipe? Basically the three types of jointing commonly used for for PE pipe are, electrofusion, butt fusion and mechanical fittings.

Mechanical fittings: are usually designed to at least meet the MOP rating of the range of PE100 pipes, i.e. SDR11 pipe 16 bar. However although the bodies of these fittings are compatible across the range of pipe SDR’s, the inserts or pipe stiffeners should normally be specified for the particular pipe SDR being used. Advice should be sought from the fittings manufacturer as to their suitability for the particular application.

Electrofusion fittings: are specified by their pressure rating, such that they are at least rated the same as the pipe pressure rating. It is however usual that the electrofusion fittings are designed and manufactured for the maximum pipe pressure rating of PE pipe, e.g. SDR11 16 bar for water application. These fittings are then also suitable for pipe of lower pressure rating e.g. SDR17 10 bar water pipe.

Fittings are normally designed on a pressure rating basis. It is accepted industry practice to use electrofusion fittings manufactured from a different grade of PE from that of the pipe, e.g. PE80 fittings may be used with PE100 pipe. In such circumstances it is considered essential that the pressure rating of the fittings is at least equivalent to that of the pipe. For example PE80 12 bar rated electrofusion fittings could be used with PE100 SDR17 pipe (10 bar rated) but not with PE100 SDR11 pipe (16 bar rated).

If in doubt advice should be sought from the fittings manufacturer as to their suitability for the particular application.