Sydney: Factory 36, 17 Lorraine St, Peakhurst, NSW 2210
Ph: 02 9534 5522 | Fax: 02 9534 5426
sales@nationalaircompressors.com.au

Brisbane: 20 Hinkler Court, Brendale, QLD 4500
Ph: 07 3205 1300 | Fax: 07 3205 1288
www.enerquip.com.au
SHIPPING AUSTRALIA WIDE!

Home > Compressed Air System Packages > Micro Filters > Ceccato Compressed Air - Line Filters


ceccato logo imageCeccato Compressed Air - Line Filters

Atmospheric air contains impurities such as:

  • filterdust
  • various forms of hydrocarbons
  • water in form of humidity

These impurities, when drawn into the compressor, are concentrated many times. They are then delivered to the plant, together with a small amount of oil particles from the compressor itself.*

These polluting agents, interacting with each other, may generate abrasive and corrosive emulsions which can damage the distribution lines, your pneumatic machines and ultimately the product being produced.

Also, with the increased automation of plants, coupled with the use of more and more sophisticated pneumatic devices has heightened the requirement of compressed air to be much of a much higher standard than has traditionally been required in the past.

* Typical values of oil carryover:
Piston Compressors: up to 500 ppm
Our Screw Compressors: < 5 ppm
(ppm = parts per million)


CECCATO LINE FILTERS

Ceccato Line Filters represent the answer to the need of having advanced compressed air able to ensure a greater efficiency and reliability also of the most sophisticated compressed air equipment.

Series FPRO

Filtration 3 µm
Yellow identification colour.

Ideal as a general filter in a line with downstream accessories; especially in the case of compressed air with high contamination of liquids and dust.

ceccato filters image

Series FM0

Filtration 1 µm
0.1 mg/m³ Residual oil
Green identification colour.
Specifically designed as:

  • A pre-filter for refrigerated dryers,
  • For de-oiling, for surface treatments etc...

Series FMM

Filtration 0.01 µm
0.01 mg/m³ Residual oil
Red identification colour.
Specifically designed as:

  • A post-filter for refrigerated dryers,
  • Pre-filter for filter series FCA
  • Pre-filter for desiccant dryers, pneumatic transports, painting plants, control systems, laser cutting, etc...(*)

Series FCA

0,005 mg/m³ Residual oil
Silver identification colour.

Activated carbon filter to remove vapour, oil and hydrocarbons smells.
Used in the pharmaceutical, foodstuffs, and chemical industry, photography labs, packaging industry, galvanic treatments, quality painting, etc...(*).


(*) Some applications may require a greater air quality (less humidity, oil or residual dust).


INTERNATIONAL STANDARD - DEGREE OF PURITY OF AIR

ISO 8573-1 OIL DUST WATER
Class Concentration mg/m³ Dimension µm Concentration mg/m³ DewPoint Water Content g/m³
1 0.01 0.1 0.1 - 70 0.003
2 0.1 1 1 - 40 0.11
3 1 5 5 - 20 0.88
4 5 15 8 + 3 6.0
5 25 40 10 + 7 7.8
6 + 10 9.4

SERIES - FILTRATION FEATURES

SERIES FILTRATION EFFICIENCY RESIDUAL OIL ¹ CLASS ISO 8573-1 ²
# Filtration µm % mg/m³ Oil Dust
FPRO 3 99.9 4 3
FMO 1 99.9 0.1 2 2
FMM 0.1 99.9999 0.01 1 1
FCA m³/min 0.005 1

SIZING - TECHNICAL DATA

SIZE RATED CAPACITY ¹ MAX PRESSURE PORT SIZE DIMENSIONS ³ WEIGHT
# m³/min cfm bar psi gas (F) Height mm Clearance mm Kg
10 1.0 35 16 232 3/8 208 60 1.1
13 1.3 46 16 232 1/2 208 60 1.1
20 2.0 71 16 232 3/4 277 80 1.2
33 3.3 177 16 232 1 295 100 2.7
60 5.6 197 16 232 1 395 120 3.2
85 8.5 300 16 232 485 140 3.7
130 13.0 459 16 232 676 160 4.8
170 16.6 586 16 232 2 743 520 8.8
250 25.0 883 16 232 2 983 770 13.5
400 40.0 1,413 12 174 3 1,144 780 30.5
¹ Reference Conditions: Pressure 7 bar (100 psi); Tempurature 20ºC
² The ISO class referring to water is not relevant to a filter only installation
³ Height: excludes optional differential pressure gauge; Clearance: lower clearance requirement for service
Max Operational Tempuratures: 65ºC for FPRO - FMO - FMM series; 35ºC for FCA series.

TYPICAL INSTALLATION

Filteration 0.01 micro Residual Oil 0.01 mg/m³

Industrial painting. Pneumatic machines. Control sstems. Sandblast & Airtools.

 

Filteration 0.01 micro Residual Oil 0.005 mg/m³

Quality painting. Pharmaceutical.
Food industry.
Chemical Industry. Packaging Industry. Galvanic applications.


  Recommended Minimum Filtration Requirements
  Piston Compressor   FPRO
  Piston Compressor with Refrigerated Dryer   FPRO (before dryer) & FMO (after dryer)
  Screw Compressor   FMO
  Screw Compressor with Refrigerated Dryer   FMO (before dryer) & FMM (after dryer)

 

  Optional Accessories
Differential Pressure Gauge   Wll Fastening kit image   Device of clogging indication image
DIFFERENTIAL PRESSURE GAUGE   WALL FASTENING KIT   DEVICE OF CLOGGING INDICATON